CAL Controls
Temperature and Process Controllers & Indicators
Cal Controls 9400 PID ControllerCAL Controls

800-876-0036

Phone: 847-356-0566   Fax: 847-356-0747      E-Mail: sales@mmcontrol.com


Back to West CS Product Categories

CAL Temperature Controllers

 

MAXVU

New!

    Product Brochure    Concise Manual      Datasheet    

Cal MAXVU

  Specifications

Product Category Temperature and Process Controller
Dimensions (Front Fascia) 1/16 DIN = 48 x 48mm
1/8 DIN = 96 x 48mm
Input Thermocouple: J, K, C, R, S, T, B, L, N.
RTD: 3 Wire PT100
DC Linear: 0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.
Scalable -1999 to 9999, with adjustable decimal point
Output RelaySPST Form A relay; current capacity 2A at 250VA.
>150,000 operations at rated voltage/current, resistive load
Outputs Up to 3 outputs, relay or SSR
SSR Drive capability >10V DC @ 20mA
Power Supply 100 to 240V 50/60Hz (mains powered version)
24V DC/AC +10%/-15%, AC 50/60Hz (low voltage version)
Communications 2 Wire RS485, 1,200 to 38,400 bps, Modbus RTU
Front Panel Protection IP65 (Behind panel IP20)
Certifications CE
Temperature & RH 0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing

MAXVU Temperature and Process Controller

MAXVU has been designed to offer essential temperature control in a device that's easy to install, fast to program, with improved display visibility.

MAXVU provides an affordable solution for applications where primary temperature control functions such as heat only or heat/cool are needed, It offers a universal input and up to 3 outputs with a choice of either relay or SSR Drive.

The new MAXVU is a cost effective temperature controller which is fast to configure, has improved display visibility and reduces costs by minimising wiring and panel space.

Models

  • MAXVU16 Compact Temperature Controller (1/16 DIN = 48 x 48mm)
  • MAXVU8 Digital Temperature Controller (1/8 DIN = 96 x 48mm)

Benefits & Features

  • 1/8 DIN (96 x 48mm) and 1/16 DIN (48 x 48mm)
  • Universal input
  • Up to 3 outputs
  • RS485 communications option
  • Fast configuration
  • Large clear display
  • Depth 67mm

MAXVU Rail Temperature Controller / Transmitter

CAL MAXVU Rail temperature and process controller

MAXVU Rail temperature and process controller is a behind panel DIN-rail mounted device that's easy to install and fast to setup with an easy to read OLED display.

MAXVU Rail provides an affordable solution where essential temperature controller is required, it offers a universal input and up to 3 outputs.

The unit also has a transmitter mode disabling control for temperature and process measurement applications.

Digital Indicator EI2041

CAL EI2041 Programmable Indicator

CAL EI2041 Programmable Indicator

The EI2041 indicator has linear mA and V input, rescaled for accurate display of process data.

With selectable input types, easy-to-adjust sampling time and various options for display, the EI2041 can be set up to meet a user's specific needs.

Digital Indicator EI2410

CAL EI2410 NTC Temperature Indicator

CAL EI2410 NTC Temperature Indicator

The CAL EI2410 temperature indicator is ideal for use with other products from the CAL thermostat range.

The EI2410 provides temperature indication on systems with NTC sensors operating within a range of -60 to 150°C.

CAL 3200

    Full Manual   Concise Manual     Datasheet    

Cal 3200 Controller

  Specifications

Product Category Single Loop controller
Dimensions and Size 24mm x 48mm x 102mm (HxWxD), 1/32 DIN
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2-wire. Linear: 0 to 50mV
Other Inputs None
Output Function Heat, Cool, Alarm
Output TypeRelay (2A,resistive), SSd ( 5Vdc +0/-15% 15mA non-isolated)
Max. No. of Outputs 2
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 100–240Vac, 50–60Hz ± 10% maximum permitted fluctuation
12V - 24V (AC/DC) ± 20% 4.5 VA Polarity not required
Communications None
Panel Sealing IP66
Certifications CE, UL
Other Functions dAC (derivative approach control)

CAL 3200 Simple PID Temperature Controller

The CAL 3200 1/32 DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

Designed for industrial or scientific applications, CAL3200 has an impact resistant smoked fascia with large rubberized buttons with positive feedback. PID tuning is simple and efficient while the unique dAC function minimizes overshoot.

Benefits & Features

  • 1 x 4 digit LED display with 2 output LED
  • Easy-to-use autotuning
  • Simple menu-driven configuration
  • Single ramp/soak (dwell) program
  • Removable terminal block for easy wiring
  • IP66 protection

CAL 3300

    Full Manual   Concise Manual     Datasheet    

Cal 3300 Controller

  Specifications
Product Category Single Loop controller
Dimensions and Size 24mm x 48mm x 102mm (HxWxD), 1/32 DIN
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2-wire. Linear: 0 to 50mV
Other Inputs None
Output Function Heat, Cool, Alarm
Output Type Relay (rly1 2A, rly2 1A resistive load), SSd ( 5Vdc +0/-15% 15mA non-isolated)
Max. No. of Outputs 2
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 100–240Vac, 50–60Hz ± 10% maximum permitted fluctuation, 12V - 24V (AC/DC) ± 20% 4.5 VA Polarity not required
Communications RS232 & RS485 Modbus RTU
Panel Sealing IP66
Certifications CE, UL, CSA
Other Functions dAC (derivative approach control), Single ramp soak
Software Tools CALgrafix – configuration and datalogging software

CAL 3300 1/32 DIN Single Loop Temperature Controller

The CAL 3300 1/32DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

Designed for industrial or scientific applications, CAL3300 has an impact resistant smoked fascia with rubberized buttons with positive feedback. PID tuning is simple and efficient while the unique dAC function minimizes overshoot.

Benefits & Features

  • 1 x 4 digit LED display with 2 outputs LED
  • Easy-to-use autotuning
  • Simple menu-driven configuration
  • Single ramp/soak (dwell) program
  • IP66 protection
  • CALgrafix datalogging software

6000 - OBSOLETE

8000 - OBSOLETE

       

Cal 6000 Single Loop Controller

 Cal 8000 Single Loop Controller

CAL 6000 Single Loop Controller

This product is now obsolete. Please refer to CAL 9300 and CAL 9400 as alternatives

CAL 8000 Single Loop Controller

This product is now obsolete. Please refer to CAL 9300 and CAL 9400 as alternatives
   

CAL 9300

    Full Manual   Concise Manual     Datasheet    

Cal 9300 Controller

  Specifications
Product Category Single Loop controller
Dimensions and Size 24mm x 48mm x 107mm (HxWxD), 1/16 DIN
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2-wire. Linear: 0 to 50mV
Other Inputs None
Output Function Heat, Cool, Alarm
Output Type Relay, SSd
Max. No. of Outputs 2
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 100–240Vac
50–60Hz ± 10% maximum permitted fluctuation 12V - 24V (AC/DC) ± 20% 4.5 Polarity not required
Communications RS232 & RS485 Modbus RTU
Panel Sealing IP66
Certifications CE, UL, CSA
Other Functions dAC (derivative approach control), Single ramp soak program
Software Tools CALgrafix – configuration and datalogging software

CAL 9300 Temperature On Off Controller

The CAL 9300 1/16 DIN temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

Designed for industrial or scientific applications, CAL9300 has an impact resistant smoked fascia with rubberized buttons with positive feedback. PID tuning is simple and efficient while the unique dAC function minimizes overshoot.

Benefits & Features

  • 1 x 4 digit LED display with 2 output LEDs
  • Easy-to-use autotuning
  • Simple menu-driven configuration
  • Single ramp/soak (dwell) program
  • IP66 protection
  • CALgrafix configuration & datalogging software

CAL 9400

    Full Manual   Concise Manual     Datasheet    

Cal 9400 Dual Display Controller

  Specifications
Product Category Single Loop controller
Dimensions and Size 48mm x 48mm x 107mm (HxWxD), 1/16 DIN
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2 wire. Linear: 0 to 50mV
Other Inputs None
Output Function Heat, Cool, Alarm
Output Type Relay (rly1 2A, rly2 1A resistive), SSd (5Vdc +0/-15% 15mA non-isolated)
Max. No. of Outputs 2
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 100–240Vac
50–60Hz ± 10% maximum permitted fluctuation
Communications RS232 & RS485 Modbus RTU
Panel Sealing IP66
Certifications CE, UL, CSA
Other Functions dAC (derivative approach control), Single ramp soak program
Software Tools CALgrafix – configuration and datalogging software

CAL 9400 Dual Display Temperature Controller

The CAL 9400 1/16DIN dual-display temperature controller is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

Designed for industrial or scientific applications, CAL9400 has an impact resistant smoked fascia with large rubberized buttons with positive feedback. PID tuning is simple and efficient while the unique dAC function minimizes overshoot.

Benefits & Features

  • 2 x 4 digit LED display with 2 output LEDs
  • Easy-to-use autotuning
  • Simple menu-driven configuration
  • Single ramp/soak (dwell) program
  • IP66 protection
  • CALgrafix configuration & datalogging software

CAL 9500

    Full Manual   Concise Manual     Datasheet    

Cal 9500P Programmable Controller

  Specifications
Product Category Programmable Temperature Controller
Dimensions and Size 48mm x 48mm x 107mm (HxWxD), 1/16 DIN
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2/3 wire. Linear: 0 to 50mV, 0/4 to 20mA, 0/1 to 5V, 0/2 to 10V
Other Inputs None
Output Function Heat, Cool, Alarm, Programmer Event
Output Type Relay (2A,resistive), SSd (5Vdc +0/-15% 15mA non-isolated) , 0/4 to 20mA, 0/1 to 5V, 0/2 to 10V
Max. No. of Outputs 3
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 100–240Vac
50–60Hz ± 10% maximum permitted fluctuation
Communications RS232 & RS485 Modbus RTU
Panel Sealing IP66
Certifications CE, UL, CSA
Other Functions Up to 31 prog x 126 segment programmer (fixed memory of 351 bytes), dAC (derivative approach control)
Software Tools CALgrafix – configuration and datalogging software

CAL 9500P Programmable Temperature Controller

The CAL 9500P 1/16DIN programmable temperature controller has a programmer function with up to 31 programs (126 segments max). It is designed to be easy-to-use and reliable within the most demanding process and manufacturing applications.

Styled for laboratory or industrial applications CAL9500P has an impact resistant smoked fascia with rubberized buttons with positive feedback. PID tuning is simple and efficient while the unique dAC function minimizes overshoot. The integrated programmer function is ideal for applications requiring temperature profile control.

Benefits & Features

  • 2 x 4 digit LED display with 2 output LEDs
  • Easy-to-use autotuning
  • Simple menu-driven configuration
  • Programmer function – 31 programs of up to 126 segments (fixed memory)
  • IP66 protection
  • CALgrafix configuration & datalogging software

CAL 9900

      Full Manual        Datasheet    

Cal 9900 Temperature Controller

  Specifications
Product Category Single Loop controller
Dimensions and Size 48mm x 48mm x 114mm (HxWxD), 1/16 DIN
Terminal Type 11 Pins base (only for 2 outputs version)
Primary Input Type Thermocouple: B, E, J, K, L, N, R, S, T. PT100 : 2/3 wire. Linear: 0 to 50mV, 0/4 to 20mV
Other Inputs None
Output Function Heat, Cool, Alarm
Output Type Relay (SP1 5A SPDT, SP2 3A SPDT), SSd (5V, 25mA).
Max. No. of Outputs 2
Control Type PID heat only, PID heat cool , ON/OFF
Power Supply 24 or 115/230Vac, 50–60Hz ± 15% maximum permitted fluctuation
Communications None
Panel Sealing IP54
Certifications CE, UL

CAL 9900 1/16 DIN Temperature Controller

At time of launch, CAL9900 was a pioneering 1/16DIN controller and continues to be used in many temperature control applications to this day.

Benefits & Features

  • 1/16 DIN (48 x 48mm)
  • Supports Heat-cool strategy
  • Auto-tune or Push-to-tune at setpoint
  • 5A output relay on main control output
  • Dual output versions can plug into 11-pin base
 

Can't find what you are looking for?
Call or E-mail Now . . . for Immediate Service, Pricing, and Delivery

* * * 800-876-0036 * * *

Phone: 847-356-0566      Fax: 847-356-0747      E-Mail: sales@mmcontrol.com

 @

 

 

Blog with M&M Control ServiceFind us on FacebookLinked InX is formerly known as Twitter

 

WARNING: Some of the products we sell can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Contact your sales rep or go to www.P65Warnings.ca.gov for more information.

All registered trademarks are fully acknowledged by: M&M Control Service, Inc.

M&M Control Service, Inc. does not represent or claim any affiliation, association, connection or approvals with or from any manufacturer unless stated. We fully acknowledge all trademarks and/or names which are pictured and/or listed throughout the M&M Control Service, Inc. Website.

(PowersTM, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for PowersTM)

(All names unintentionally excluded from this list will be included in the next revision upon our notification.)

*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

Copyright 2024 M&M Control Service Inc., All Rights Reserved