Vertically-Mounted Products
Bypass Indicators Series 1015
Indicators, By Means of Two Process Connections
- Product Types: BNA, BMG
- NPT, ANSI, DIN: 1/2" and up
- Operating Pressure: 0-5800 psig
- Material: 316SS, Titanium, PP, PVC, PVDF, E-CTFE coated
The bypass indicators form an integral part of a tank. A pipe is mounted on the side of the tank by means of two process connections. This ensures that the level in the tank corresponds exactly to the level in the pipe. Red/white magnetic rollers show the level visually. Level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Top-Mounted Indicators Series 1016
Indicators, Mounted on Top of Tank
- Product Types: UNA, UMG
- NPT, ANSI, DIN: 1/2" and up
- Operating Pressure: 0-5800 psig
- Material: 316SS, PP, PVC, PVDF
The bypass indicators form an integral part of a tank. A pipe is mounted on top of the tank by means of a process connection. This ensures that the level in the tank corresponds exactly to the level in the pipe. Red/white magnetic rollers show the level visually. level sensors mounted on the unit will give a 4-20mA output or 0 to 100% output. Magnetic switches will give a high or low alarm.
Sensors & Transmitters
Series 1001
Level Sensors, Mounted on Top of Tank
- Product Types: A...E...VK
- Triclamp: 1/4" and up
- Operating Pressure: 0-2500 psig
- Material: 316SS, Titanium, Brass, PP, PVDF, E-CTFE coated
Level sensors are used as measuring sensors to show a continuous display of the level inside the tank. The magnetic field inside the float actuates very small reed switches inside the guide tube. These pick up an uninterrupted measuring voltage from a resistance chain which is proportional to the liquid level inside the tank.
Float Switches
Series 1003
Float Switches, Mounted Inside of Tank
- Product Types: A...E
- Triclamp: 1/4" and up
- Operating Pressure: 0-2500 psig
- Material: 316SS, Titanium, Brass, PP, PVDF, E-CTFE coated
Magnetic float switches work with magnetic transmission. A magnet which is built in the float actuates with its magnetic field, through the wall of the guide tube, one or more reed switches. This way, volt-free opening, closing or change-over functions can be reached. Volt-free reed contacts are an ideal switching element in connection with PLC controls.
Suspended Float Switches
Series 1009
Switches, Mounted Inside of Tank
- Product Types: MS1, M2, ME
- Connection: Cable
- Operating Pressure: 0-20 psig
- Material: Polypropylene
Level controller with a compound-filled encapsulated Hg control element. Switching currents can range from 1mA to 2A with surge currents up to 5A making them able to directly switch very small currents in an electronic circuit. Voltage range are from 4 to 250V.
Electrodes Series 1004
Electrodes, Mounted Inside of Tank
- Product Types: EVR...L1
- NPT, ANSI: 1/4" and up
- Operating Pressure: 0-1400 psig
- Material: Stainless Steel, Brass
Electrodes are electrically conducting rods that can be used to monitor and control filling levels. If the electrodes are immersed in an electrically conducting liquid, the resulting current will activate the relay contacts via a signal amplifier. These controllers are suitable for high/low alarms.
Magnetic Switches Series 1008
Magnetic Switches
- BSP: M20
- Material: Brass, Stainless Steel, Polyamide, Aluminum
Magnetic switches operate under extreme environmental conditions such as dirt, moisture, gases, dust and shavings. Stable switching point, operable from different directions and very cost effective.
Flow Monitors Series 1007
Granzow Flow Monitors
- Product Types: RV, DU, DW, DK
- NPT, BSP: 1/4" and up
- Operating Pressure: 0-2000 psig
- Material: Stainless Steel, Nickel-Plated Brass
Monitoring of liquid and gaseous media in refrigeration systems, welding machines, laser and piping systems, pumps, compressors and hydraulic systems. The switching point can be continuously adjusted within the switching range.
Control Units Series 1011
Control Units; Supplies, Contact Protection
- Product Types: TP, TD, XT, MUL, NL
Transmitters with or without HART, power supplies, digital indicators, digital loop-powered indicators, analogous loop panel meters, contact protection relays, conductive level controllers, leakage detectors and speed and frequency monitors.
|
|
