Fireye^®

InSight II 95DSS3 Flame Scanner

The Fireye InSight® II Type 95DSS3 flame scanners are microprocessor-based flame scanners utilizing solid-state infrared and ultraviolet sensors. The Fireye InSight II flame scanners incorporate two internal flame relays with adjustable on/off thresholds and two 4-20 mA analog outputs, thereby eliminating the need for a remote flame amplifier.

InSight Flame Scanners 95IR 95UV 95DS 95DSS2

The Fireye InSight® Type 95IR, 95UV, 95DS, and 95DSS2 flame scanners are microprocessor-based flame scanners utilizing solid-state infrared (IR), ultraviolet (UV) or dual (IR and UV) sensors. The Fireye InSight Type 95 flame scanners incorporate an internal flame relay with adjustable ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier.

Simplicity 65UV5 Flame Scanner

The Fireye Simplicity^TM 65UV5 self-checking scanners are used to detect ultraviolet emissions from fossil fuel flames such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum distillates and diesel fuels. The 65UV5 scanner is available with a one-second or four-second flame failure response time (FFRT) depending on the model selected.

Phoenix Series 2 Type 85UVF-IRF Flame Scanners

The Fireye Phoenix Series 2 type 85UVF/IRF flame scanners are microprocessor-based devices utilizing a solid-state flame detection sensor. The Phoenix flame scanners incorporate an internal flame relay with automatically set ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier or flame switch. Phoenix scanners incorporate full self-diagnostics and electronic self-checking.

InSight Series 4 Flame Scanner

The InSight Series 4 scanners utilize advanced techniques for discrimination and integrate the flame detection, amplification, safety determination, and flame switch functions into a single detection head. InSight Series 4 incorporates the superior detection and discrimination elements of the popular InSight II product with some enhanced features. The appropriate modulation frequency and sensor gain can be either manually or automatically selected.

Flame Scanner Tester

The FS-2 Flame simulator provides the means to test Fireye Flame scanners sensitive to UV or IR light energy. It is designed for use with all Fireye optical flame scanners. Unit includes a 1" NPT sight pipe for use with Fireye 1" NPT mounted scanners. A 1/2" to 1" pipe adaptor may be used for testing Fireye 1/2" NPT UV1A and 48PTS series scanners. This unit has settings to adjust flicker frequency for both IR and UV light sources, and includes a 24 VDC power supply for testing Fireye DC-powered scanners.

InSight II Flame Scanner Cooling Cover

Flame scanner cooling in high ambient temperature applications

An effective solution to assit in maintaining the Fireye InSight II flame scanner's temperature below its published limit. In high ambient temperature applications, additional cooling can be required. Cooling air is applied to the space between the cooling cover and the InSight II flame scanner. This can help maintain the lower scanner temperature.

 

 

 

 

 

800-876-0036