Distributing These Fine Products

Fireye^®

Fireye Flame Scanners and Applications

Ultraviolet Scanners

Infrared Scanners

We only sell new, factory fresh, FM approved items. Would you risk your plant or building on a "rebuilt or reconditioned" item?

800-876-0036

Phone: 847-356-0566 Fax: 847-356-0747 E-Mail: sales@mmcontrol.com

Fireye UV & Infrared Flame Scanners and Applications

The following Fireye flame scanners are used in conjunction with the appropriate Fireye flame safeguard controls to provide reliable flame detection on a variety of burner applications and fuel types.

UVIA	Bulletin SC-102
Ultraviolet miniature non self-checking scanners. The UV1A is suitable for fuel gases and no. 2 oil. Non-replaceable tube. Mounting collar 1/2" NPT. Available with 3 ft (UV1A3), 6 ft. (UV1A6), or 50 ft. (UV1A50) of flexible conduit. Explosion proof housings are available.
UV90	Bulletin SC-102
Ultraviolet miniature non self-checking scanner suitable for frontal or side (90°) viewing. Complete with mounting fixture. Available with 3 ft (UV90-3), 6 ft. (UV90-6), or 9 ft. (UV90-9) of flexible conduit.
UV2	Bulletin SC-102
Ultraviolet miniature non self-checking scanner. Similar in function to the UV1A3 but with a smaller mounting collar (3/8"). Non-replaceable tube.
UV8A	Bulletin SC-102
A 90× version of the UV1A6, but with unshielded leads and 0.70" diameter collar to be used with a 1/2" E.M.T rain tight fitting (not furnished). The mounting collar is 1/2" NPT. Must be installed with metal shielding over the scanner leads.
45UV5-1005, 45UV5-1006, 45UV5-1007, 45UV5-1008, 45UV5-1009	Bulletin SC-101
Self-checking ultraviolet scanner is for continuously fired applications where recycling is infrequent or absent. The self-checking circuit checks the electronics and the UV tube for proper operation every four seconds during the firing period. Suitable for fuel gases and oil. Replaceable UV tube and (4-314-1) shutter mechanism (61-2914). Mounting 1" NPT or BSP pipe thread with 8 ft. (2.4m) lead wires. Must be installed with metal shielding over the scanner leads. Explosion-proof housings are available for models 45UV5-1007 and 45UV5-1009.
45UV3-1050	Bulletin SC-102
A rugged diecast housing that mounts on 3/4 inch pipe with setscrew. Vertical mounting of UV tube provides greater sensitivity. UV tube is replaceable (4-314-1). Scanner is non self-checking. 4 ft (1200mm) lead wires. Must be installed with metal shielding over the canner leads.
69ND1	Bulletin SC-103
Flame rod for gas flames only. The flame rod is an inexpensive reliable gas flame detector. Mounting 1/2" male NPT. 12" (304mm), 18" (475mm), and 24" (609mm) available.
45CM1	Bulletin SC-103
Photocell scanner with #922 photocell and Rajah stud terminal is designed for use in the blast tube on conventional pressure atomizing oil burners. Available with or without a filter.
48PT2	Bulletin SC-103
Lead sulfide infrared scanner is designed to detect low frequency IR signals from gas or oil flames. Mounting collar is 1/2" NPT with straight or 90× mounts (shown). Available with 4 ft (121.9m) or 8 ft (243.8m) flexible conduit. Replaceable 4-263-1 sensor cell.
48PT1	Bulletin SC-103
Lead sulfide infrared detector is identical in size and function to the 48PT2 but is used with the older-style P-Series controls (e.g. 26RJ8, 29RF5 controls). The mounting collar is 1/2" NPT. Replaceable 4-128-1 sensor cell. Available with 4 ft. (122) or 8 ft. (244) flexible conduit.

PART NUMBER	DESCRIPTION	USE WITH	BULLETIN
Ultraviolet Scanners
UV1A-1-CEX	Cenelec EExd IIC explosion-proof housing with UV1A scanner.	Flame -Monitor, FlameWorx, MB, C-Series, D-Series, M-Series, M-II Series, MicroM Series with non-self check amplifier.	SC-102
UV1A3 1/2"	NPT Connector, 3 ft. (914mm) flexible cable. Non self-checking.
UV1A6 1/2"	NPT Connector, 6 ft. (1828mm) flexible cable. Non self-checking.
UV1A50	1/2" NPT Connector, 50 ft. flexible cable.Non self-checking.
UV2 3/8"	NPT Connector, 3 ft. (914mm) flexible cable. Non self-checking.
UV8A 1/2"	NPT 90× head, 6 ft. wire, no cable. Non self-checking.
UV90-3	UV non-self check scanner for frontal or side (90°) viewing. Complete with mounting fixture and 3 ft. (900mm) flex conduit.
UV90-6	UV non-self check scanner for frontal or side (90°) viewing. Complete with mounting fixture and 6 ft. (1800mm) flex conduit.
UV90-9	UV non-self check scanner for frontal or side (90°) viewing. Complete with mounting fixture and 9 ft. (2700mm) flex conduit.
45UV3-1050	UV Scanner, 3/4" sleeve/set screw mounting. Non self-checking.	25RU8 only	SC-103
45UV2-1020	UV Scanner, 1 inch NPT mount, 60 Hz. Non self-checking.	25RU8 only	SC-103
45UV5-1005	UV self-check scanner 1 inch NPT threads. 25VDC shutter circuit.	25RU8-4580, 25SU5-4018	SC-101
45UV5-1105	Same as 1005 but British threads.	25RU8-4580, 25SU5-4018	SC-101
45UV5-1006	UV self-check scanner. Use with self-check amplifier only, 1 inch NPT threads.	D-Series, 72DUVS1 only	SC-101
45UV5-1007	UV self-check scanner. Use with self-check amplifier. 1 inch British threads, 230 VAC shutter.	Flame-Monitor, C-Series, D-Series, MicroM Series with self-check amplifier.	SC-101
45UV5-1007CEX	Cenelec EExd IIC explosion proof housing with 45UV5-1007 scanner.
45UV5-1008	UV self-check scanner. Use with self-check amplifier. 1 inch British threads, 120 VAC shutter.
45UV5-1009	UV self-check scanner. Use with self-check amplifier. 1 inch NPT threads, 120 VAC shutter.
45UV-1009CEX	EExd explosion proof housing with 45UV5-1009 scanner.
45UV5-1009EX	Explosion proof 45UV5-1009. Class I, Div. 1 and 2, Groups C and D. Class 2 Div. 1 and 2, Groups E, F, G.
Infared Scanners
48PT1-1003	IR Scanner, 8 ft. (2400mm) shielded cable, straight head	P-Series	SC-103
48PT1-1007	IR Scanner, 4 ft. (1200mm) shielded cable, straight head
48PT1-9003	48PT1-1003, 8 ft. shielded cable with 90× head
48PT1-9007	48PT1-1007, 4 ft. shielded cable with 90× head
48PT1-9007W	48PT1-9007, 4 ft. shielded cable, water repellent with 90× head
48PT2-CEX	Cenelec EExd IIC explosion proof housing with 48PT2 scanner	Flame-Monitor, C-Series, D-Series, MicroM Series with infrared amplifier.	SC-103
48PT2-1003	IR Scanner, 8 ft. (2400mm) shielded cable, straight head
48PT2-1007	IR Scanner, 4 foot (1200mm) shielded cable, straight head
48PT2-9003	48PT2-1003, 8 ft. shielded cable with 90× head
48PT2-9007	48PT2-1007, 4 ft. shielded cable with 90× head
48PT2-9007W	48PT2-9007, 4 ft. shielded cable, water repellent with 90° head
69ND1-1000K4	Flame Rod 12 inches 1/2" mount	Flame -Monitor, FlameWorx, MB, C-Series, D-Series, M-Series, M-II Series, MicroM Series with flame rectification amplifier.	SC-103
69ND1-1000K6	Flame Rod 18 inches 1/2" mount
69ND1-1000K8	Flame Rod 24 inches 1/2" mount
45CM1-1000	Photocell scanner without filter
45CM1-1000Y	Photocell scanner with filter

Can't find what you are looking for?

Call or E-mail Now . . . for Immediate Service, Pricing, and Delivery

* * * 800-876-0036 * * *

Phone: 847-356-0566 Fax: 847-356-0747 E-Mail: sales@mmcontrol.com

WARNING: Some of the products we sell can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Contact your sales rep or go to www.P65Warnings.ca.gov for more information.

All registered trademarks are fully acknowledged by: M&M Control Service, Inc.

M&M Control Service, Inc. does not represent or claim any affiliation, association, connection or approvals with or from any manufacturer unless stated. We fully acknowledge all trademarks and/or names which are pictured and/or listed throughout the M&M Control Service, Inc. Website.

(Powers^TM, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for Powers^TM)

(All names unintentionally excluded from this list will be included in the next revision upon our notification.)

*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

Fireye®