Six Real World Ranges— 1 to 20000
Counts-Per-Hour (CPH), 0.1 to 2000.0 Counts-Per-Minute (CPM),
0.01 to 999.99 Hz, 0.001 to 99.999 kHz and 0.01 to
250.00 kHz.
Calibrate Totalizers—
Output a selectable number of pulses over 1 to 99
minutes to verify totalizer readings. The calibrator
automatically stops outputting when the selected number
of pulses has been sent to the totalizer.
Count Pulses—
Use as a timed totalizer to check flowmeter and
integrator outputs. Built-in totalizer to 99999 counts
with optional timed operation to 99 minutes up to
maximum rate of 100 Hz.
Save Time—
Calibrate flowmeters, frequency transmitters and
integrators. Use CPH and CPM ranges to directly display
extremely slow signals, eliminating waiting with stop
watch and calculator.
Match Your Receiver's
Input— Select
from sine, zero crossing square or zero based square
wave output. Adjustable amplitude from 50 mV to 12 V p-p
.
Reads All Waveforms— From 40 mV
to 240 V peak. Instantly recall the minimum and maximum
frequency measured.
Quik-Chek Switch—
Instantly recall
18 output frequencies (three for each range). Fast, easy
adjustment with a multi-speed digital potentiometer.
Built-In Leads— Large
alligator clips for easy connections. Optional BNC
connector available.
Long Battery Life— Six AA
alkaline batteries last over 40 hours.
