|
|
Take a process input signal from a temperature, pressure, level, or flow transmitter loop and view real-time process status in rugged and hazardous field environments.
| |
|
| Featured Interface Solutions |
| Model |
Input |
Output |
Power |
Mounting |
|
SPD Programmable Field-Mount Loop Display (NEMA 4X, IP66)
|
4-20mA
from Temperature, Pressure, Level or Flow Transmitter
|
Sets Up in Less Than a Minute
to display a percent or any engineering unit
Square Root and Custom Curves are User-Configurable
Dual Relay Outputs
Configurable for High and/or Low Process Alarms
|
2-Wire, 2.3 Volts Loop-Powered
4-Wire, Line-Powered (24DC)
|
Field Mount NEMA 4X, IP 66 Housing
(pipe and surface mount)
|
PSD PC-Programmable
4-20mA Loop Display
|
4-20mA
from Temperature, Pressure, Level or Flow Transmitter
|
Sets Up in Less Than a Minute
to display a percent or any engineering unit
Square Root and Custom Curves are User-Selectable
|
Exceptionally Low
2.3 Volts Loop-Powered
|
Field Mount
Hockey-Puck
(head, pipe, DIN rail, relay-track, surface, and explosion-proof)
|
|
PPM Programmable AC Power Monitor and Display
|
Current
5A
|
High-Contrast, Backlit Display with Wide Viewing Angle Provides 3 Lines of Power-Measurement Data
Relay Outputs
Standard two-pulse discrete outputs represent KWh and kvarh or KWh and kVAh
Optional Fieldbus Output
MODBUS RTU digital communication for reading multiple power-measurement parameters at a monitoring/control system.
|
110AC auxiliary power, 45-65Hz
230AC auxiliary power, 45-65Hz
|
High-Density Panel-Mount Housing
|
Voltage
400Vac L-L, 3 Phase, 3-Wire
230Vac L-N, 3 Phase, 4-Wire
208Vac L-L, 3 Phase, 3-Wire
120Vac L-N, 3 Phase, 4-Wire
480Vac L-L, 3 Phase, 3-Wire
277Vac I-N, 3 Phase, 4-Wire
110Vac L-L, 3 Phase, 3-Wire
63Vac L-N, 3 Phase, 4-Wire
Programmable
Programs to accomodate user CTs and/or PT primaries
|
| Additional Indicator and Display Capabilities |
|
- mA, mV, V, RTD, and T/C Inputs
- 2-Wire (Loop-Powered) and 4-Wire (Line-Powered)
- Readout in Engineering Units and Percentage
- Configurable Parameters
|
|
- Square Root and Custom Curves
- Low Power Consumption
- Alarm and Analog Outputs
- DIN Rail, Panel, Surface, Pipe, and Field-Mount
|
|
|
