Featured Interface Solutions
Model	Input	Output	Power	Mounting
HIM HART® Interface Module	Accepts and "Reads" the HART Digital Protocol Signal that Rides on the 4-20mA Wires of a Smart HART Multivariable Transmitter or Valve	"Break Out" Analog Signals Representing the Multivariable Transmitter's Primary, Second, Third or Fourth Variables, or Smart Valve Position and Status Parameters Two or three 4-20mA Signals Optional Dual Relay Outputs Warn of Unwanted Process Conditions or Diagnostic Problems High/Low Alarms (Failsafe or Non-Failsafe) Two Redundant MODBUS RTU (RS-485) Data Links Digital Display Shows Process Status and Fault Messages	24Vdc	High-Density and RFI Resistant Aluminum DIN-style (G-type and Top Hat rails)
HCS HART® Concentrator System HART-to-MODBUS Converter	Accepts and "Reads" the HART Digital Protocol Signal that Rides on the 4-20mA Wires of a Smart HART Multivariable Transmitter or Valve	Converts the HART Digital Signal to serial (RS-485) MODBUS RTU Communication Protocol to allow smart transmitters and valves to interface with MODBUS-based systems.	4-Wire, Line-Powered (24Vdc)	High-Density and RFI Resistant Aluminum DIN-style (G-type and Top Hat rails)
SPA 4-Wire Site-Programmable HART Loop Monitor and Alarm	Monitor a Process Variable and "Health" of a HART Transmitter or Valve Accepts a HART digital input from a pressure, temperature, level, flow or multivariable transmitter or from a smart HART valve.	Dual Relays Quadruple Relays Selectable with On-Board Controls High Alarm Low Alarm Failsafe Non-Failsafe Normally Open Normally Closed Latching Non-Latching HART Fault Alarm Analog Output Proportional to transmitter measurement, any multivariable transmitter measurement or valve stem position	Takes Any Power Supply 4-Wire, Universal Powered (accepts 22-300Vdc or 90-260Vac) CE approved unit comes with a 24Vdc, 117Vac or 230Vac power supply.	High-Density and RFI Resistant Aluminum DIN-style (G-type and Top Hat rails)
HFA 4-Wire HART Fault® Alarm	Monitor the "Health" of a HART Instrument Accepts a HART digital input from a temperature, pressure, level, flow or multivariable transmitter.	Single-Pole/Double Throw HART Fault Alarm High Alarm Low Alarm Failsafe Non-Failsafe Latching Non-Latching	4-Wire, Line-Powered (18-30Vdc)	High-Density and RFI Resistant Aluminum DIN-style (G-type and Top Hat rails)
HIT and HIX 2- and 4-Wire HART® Isolators	4-20mA input with superimposed HART digital protocol signal	Isolates Loop, Lets HART Digital Signal "Pass Through" 4-20mA output with superimposed HART digital protocol signal	HIT 4-wire line-powered (24Vdc, 117Vac, 230Vac) HIX 2-wire loop-powered (12-42DC)	Thermoplastic DIN-style (G-type and Top Hat rails)
THZ & TDZ Isolated 2-Wire Smart HART Temperature Transmitters	Programmable via HART Communicator or Intelligent PC Software with HelpMap RTD 2-, 3-, 4-Wire Platinum, Copper, Nickel Thermocouple J, K, E, T, R, S, N, C, B Ohms 0 to 4000 ohms Millivolts -50 to 1000mV	Standard, Easy-to-Read Process Displays 4-20mA output with superimposed HART digital protocol signal	2-Wire, Loop Powered (12-42Vdc or 12-28Vdc for IS applications)	NEW Field-Mount Dual-Compartment and Hockey-Puck with Complete Temperature Assemblies (head, pipe, relay-track, surface and explosion-proof) High-Density and RFI Resistant Aluminum DIN-style (G-type and Top Hat rails)