Condensate Recovery Equipment

Condensate recovery allows you to use all of the valuable Btu within the steam system. Depending on the pressure, condensate leaving a trap contains approximately 20% of the heat energy transferred at the boiler in the form of sensible heat.

Condensate recovery systems help you reduce three tangible costs of producing steam:

Fuel/energy costs
Boiler water make-up and sewage treatment
Boiler water chemical treatment

The workhorses in any condensate recovery system are condensate pumps. Their job is to move condensate or other liquids from low points, low pressures or vacuum spaces to an area of higher elevation or pressure.

Armstrong can provide complete engineered condensate pumping system solutions, allowing you to take advantage of this most fundamental of energy management practices. Single pump capacities range from 350 lb/hr to 73,000 lb/hr (158 kg/hr to 33112 kg/hr), depending on application conditions. You may also depend on Armstrong for complete custom pre-piped packages, ASME packages, mechanical and electric pumps, and accessories.

Condensate Recovery Equipment products

Pressure Operated Mechanical Pumps
- Pumping Traps
  - Series 100 - Cast Iron/< 1800 lb/hr / 816 kg/hr
  - Series 200 - Cast Iron/Up to 3,700 lb/hr / 1678 kg/hr
  - Series 400 - Steel/Up to 12,200 lb/hr / 5534 kg/hr
  - Series 3500 - Cast Iron/Up to 14,500 lb/hr / 6532 kg/hr
  - Light Liquid Applications
  - Series 300 - Steel/Up to 16,600 lb/hr / 7530 kg/hr
  - Series 500 - Steel/Up to 80,000 lb/hr / 36363 kg/hr
- Pumping Trap Packages (Commercial/Industrial)
  - Series 100 – Cast Iron/Up to 2350 lbs/hr / 1066 kg/hr
  - Series 200 – Cast Iron/Up to 3700 lbs/hr / 1678 kg/hr
  - Series 400 – Steel/Up to 12200 lbs/hr / 5534 kg/hr
  - Series 3500 – Cast Iron/Up to 14400 lbs/hr / 6531 kg/hr
  - Series 300 – Steel/Up to 16600 lbs/hr / 7530 kg/hr
  - Series 500 – Steel/Up to 73000 lbs/hr / 3311 kg/hr
- Industrial Flanged Welded Packages
  - All Models
and Pump Combination
- SteamTrap/Pump Combinations
  - Double Duty 4-Ductile Iron/Up to 350 lb/hr (159 kg/hr)
  - Double Duty 6-Carbon Steel/Up to 4,800 lb/hr (2177 kg/hr)
- Steam Trap/Pump Combination Packages
  - Double Duty 4 Package-Ductile Iron/Up to 350 lb/hr (159 kg/hr)
  - Double Duty 6 Package-Carbon Steel/Up to 4,800 lb/hr (2177 kg/hr)
Electric Condensate Return Pumps
- Electric Condensate Pumps
  - All Models
- Boiler Feed Pumps
  - All Models
- Vacuum Return Pumps
  - All Models
Condensate Accessories
- Flash Recovery Vessel
- Pre-piped PRV Station
- Retrofit Assembly Cap
- All Models

We Carry:

(Click Name for more info)

Most Items available for immediate shipment!

-Copyright 2009 M&M Controls, All Rights Reserved

ALL REGISTERED TRADEMARKS ARE FULLY ACKNOWLEDGED BY:
M&M Control Service, Inc.
(ALL NAMES UNINTENTIONALLY EXCLUDED FROM THIS LIST WILL BE INCLUDED IN THE NEXT REVISION UPON OUR NOTIFICATION)
*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

(Powers™, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company. The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc. M&M Control Service, Inc. Is a Stocking Distributor for Powers™)

M&M CONTROL SERVICE, INC. DOES NOT REPRESENT OR CLAIM ANY AFFILIATION WITH ANY MANUFACTURER. WE FULLY ACKNOWLEDGE ALL TRADEMARKS AND/OR NAMES WHICH ARE PICTURED AND/OR LISTED THROUGHOUT THE M&M CONTROL SERVICE, INC. WEBSITE.