MULTIFUNCTION
 QuikCal
890
The New QuikCal 890 Multifunction Calibrator from
ALTEK
Generates and maintains pressure at the touch of a
button—no
pump required.
Generates source pressures from 0.001 "H2O to
100 PSI. Runs multipoint pressure, temperature, and DC tests
simultaneously and instantly
Offers an unsurpassed accuracy of 0.025% of
reading. Pressure modules
available for measurement of Gauge, Differential, Vacuum, Absolute,
Compound, Draft and High Pressure; Additional Modules for
Thermocouple, RTD and Electrical Signals.
The World’s First Fully Automated Pressure
Source And The World’s Most Accurate Field Calibrator!
 
 TechChek
Model 830
The
Technician Friendly Multifunction Calibrator with "Keep It
Simple" Controls.
Introducing
the first easy-to-use multi-function calibrator. Just turn the knob
to select a function, connect it up and start calibrating! Take
the TechChek 830 to every site. It's like bringing a cartload of
test equipment from the shop to the control room or the field. The
TechChek 830 sources and reads like a milliamp or voltage calibrator,
simulates and measures T/Cs & RTDs like a temperature calibrator,
generates and counts frequency and Counts-Per-Minute like a frequency
calibrator and displays pressure like a precision test gauge. Troubleshooting?
It checks continuity with a beeper and measures AC line voltage
like a multimeter!
Compact
Multifunction Calibrator — Source
and Read Milliamps, Volts, Millivolts, Six RTD Types, Seven Thermocouple
Types, Resistance and Frequency.
Built-In
Transmitter Power Supply — Simulates
transmitter input while simultaneously powering 2-wire transmitters
and displaying milliamp or % 4—20 output on the dual display.
Accuracy
of ±(0.025% of Full Scale + 1 LSD) Typical — Accurate
to 0.02 mA, V, or Hz, 1¡C & 0.3 Ohms.
Laboratory
Accuracy Pressure Measurement — QuikCal
pressure modules display in 20 engineering units. Match your process
within 0.025% of reading in psi, pa, Kpa, Mpa, BAR, mBAR, Atm, Kgf
plus torr, inches and mm of Hg or H20 at a variety of temperatures.
Each module is characterized for temperature to give you laboratory
accuracy in the shop, control room or field.
Troubleshoot
Loops — AC Voltmeter
(true rms) and Continuity Beeper built-in.
Standard
AA Alkaline Batteries — Over
20 hours of full 20 mA output. Auto-Off saves batteries. Optional
AC adaptor for full time bench use.
User
Settable QUIK-CHEKS — Store
HI, SET & LO for instant recall.
Digital
Accuracy with Analog Simplicity — Speed
sensitive digital pot for fast output adjustment. Easy-to-read large
character LCD with selectable backlighting.
Deluxe
Accessories Set Included — Carrying
case with neck strap for hands-free viewing plus detachable leads,
alligator clips, test probes & spade lugs.
 Process
Calibrator TechChek 820
Versatile
Process Calibrator — Multiple Functions for Multiple Applications!
Lighten
your load by taking the TechChek to every site. It's like bringing
a cartload of test equipment from the shop to the control room or
the field.
Functions
Like a Calibrator — Milliamps,
Voltage, RTD, T/C & Frequency.
Measures
Like a Multimeter — Measure
AC/DC Volts, Ohms & Continuity.
Digital
Accuracy with Analog Simplicity — Speed
sensitive digital pot for fast adjustment.
Typical
Accuracy to ±0.025% — Accurate
to 0.02 mA, V or Hz, 1¡C, & 0.3 Ohms.
Reads
& Sources Standard Process Signals — ¡C,
¡F, mA, % 4 to 20, V, mV, Ohms, Hz & CPM.
Easy-to-Use
— Simple, menuless operation.
User
Settable Quik-Chek Switch — Set
any Span and Zero.
Minimum
& Maximum Tracking — Instantly
recall the highest & lowest measurements.
Standard
AA Alkaline Batteries — Long
battery life with quick battery changes.
Deluxe
Accessories Set Included — Carrying
case with neck strap for hands-free viewing plus detachable leads,
alligator clips, test probes & spade lugs.
Milliamp
& Voltage Loop Calibrator Model 934
Lab
Accurate! Field Tough! 
Take
the accuracy of a cal lab to the field with the ALTEK Model 934
mA/V Loop Calibrator. Accurate to ±0.004 mA from 0 to 24 mA...more
accurate than costly 7 1/2 digit meters.
Simultaneous
Source & Read — Isolated
to 500 V DC. Dual 5 digit Liquid Crystal Display. Fuseless protection
to 120 V AC/DC.
Multifunction
— Source to 24.000 mA, 999.90
mV or 20.00 V DC, read to 24.000 and 52.00 mA, 999.90 mV or 99.990
V DC. Plus simulate and power/measure 2-wire transmitters.
High
Resolution — Up to 1
microamp and 10 microvolt. Convenient ranges for % of 4-20 mA, %
DP flow and user adjustable engineering units.
High
Accuracy — ±0.02 % of
reading. Source to within 0.004 mA, 0.2 mV or 0.004 V.
QUIK-CHEK
Switch — Instantly recall
any 3 outputs for each range. Fast, easy adjustment with
our multi-speed "digital potentiometer."
AUTO-CHEK
— Automatically sequenced
outputs in 2, 3, 5 or 10 equal steps at intervals of 5 to 900 seconds.
Model 934 CE CE version is identical to the 934
but comes without a jack for an AC adapter.
|
