Webmail

 

Peristaltic Metering Pumps - Over One Million Pumps in the field!

A-100N Peristaltic Pumps FlexFlo®
 

A-1600 Peristaltic Pumps FlexFlo®

Peristaltic Metering Pump

  

OEM Peristaltic Hose Pump

  • Max feed rate
    3.96 GPH  /  249.8 ML/Min

  • Max pressure
    100 PSI  /  6.8 bar

  • Patented Tube Failure Detection

  • Fixed speed & Variable speed

 

  • Max feed rate
    4.6 GPH  /  290.2 ML/Min

  • Max pressure
    25 PSI  /  1.7 bar

  • Perfect OEM solution

Flex-Pro® A3 Peristaltic Pump

  • Max feed rate
    33.3 GPH  /  2100.9 ML/Min

  • Max pressure
    125 PSI  /  8.6 bar

  • Variable speed brushless DC motor

  • Washdown, NEMA 4X (IP66)

  • Patented Tube Failure Detection

  • Accuracy: +/- 0.5%

  • Repeatability: +/- 0.5%

  • Output adjustment: 1-100% in 0.1% increments

Peristaltic Pump

Download Product information Section (CLICK HERE)

 

Caution: Always wear protective clothing, face shield, safety glasses and gloves when working on or near your metering pump.
Additional precautions should be taken depending on the solution being pumped. Refer to MSDS precautions from your solution supplier.
 

Note: All diagrams are strictly for guideline purposes only. Always consult an expert before installing the metering pump on specialized systems. The metering pump should be serviced by qualified persons only.

 

 

We Carry:

(Click Name for more info)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Most Items available for immediate shipment!

-Copyright 2010 M&M Controls, All Rights Reserved

ALL REGISTERED TRADEMARKS ARE FULLY ACKNOWLEDGED BY:
M&M Control Service, Inc.
(ALL NAMES UNINTENTIONALLY EXCLUDED FROM THIS LIST WILL BE INCLUDED IN THE NEXT REVISION UPON OUR NOTIFICATION)
*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

(Powers™, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company.  The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc.  M&M Control Service, Inc. Is a Stocking Distributor for Powers™)

M&M CONTROL SERVICE, INC. DOES NOT REPRESENT OR CLAIM ANY AFFILIATION WITH ANY MANUFACTURER. WE FULLY ACKNOWLEDGE ALL TRADEMARKS AND/OR NAMES WHICH ARE PICTURED AND/OR LISTED THROUGHOUT THE M&M CONTROL SERVICE, INC. WEBSITE.